JN0-664 PDF study guide & Juniper JN0-664 test-king
P.S. Free 2025 Juniper JN0-664 dumps are available on Google Drive shared by RealVCE: https://drive.google.com/open?id=1SdNAaOmubp5V958CWjWeoHfwDTrFhWdv
The best valid and most accurate Juniper JN0-664 exam study material can facilitate your actual test and save your time and money. Generally, you are confused by various study material for JN0-664 preparation. Now, please pay attention to RealVCE JN0-664 reliable study material, which is the best validity and authority training material for your preparation. The JN0-664 actual test will bring you full scores.
The JN0-664 exam is a challenging exam that requires a deep understanding of Juniper Networks technologies and their applications in service provider environments. It is designed to test the skills and knowledge of professionals who work with Juniper Networks technologies on a daily basis and who are responsible for maintaining and troubleshooting complex service provider networks.
Juniper JN0-664 Certification Exam is a professional-level certification offered by Juniper Networks. It is designed to test the knowledge and skills of individuals who specialize in service provider networking technologies. As a JNCIP-SP certified professional, you will have the ability to design, configure, manage and troubleshoot Juniper Networks service provider routing and switching platforms.
>> JN0-664 New Practice Materials <<
Realistic JN0-664 New Practice Materials - Valid Service Provider, Professional (JNCIP-SP) Test Answers
Nowadays the competition in the job market is fiercer than any time in the past. If you want to find a good job，you must own good competences and skillful major knowledge. So owning the JN0-664 certification is necessary for you because we will provide the best study materials to you. Our JN0-664 Exam Torrent is of high quality and efficient, and it can help you pass the test successfully.
Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q55-Q60):
NEW QUESTION # 55
Referring to the exhibit, you must provide Internet access for VPN-A using CE-1 as the hub CE.
Which two statements are correct in this situation? (Choose two.)
Answer: A,D
NEW QUESTION # 56
Exhibit
You want to use both links between R1 and R2 Because of the bandwidth difference between the two links, you must ensure that the links are used as much as possible.
Which action will accomplish this goal?
Answer: D
Explanation:
Explanation
VPLS is a Layer 2 VPN technology that allows multiple sites to connect over a shared IP/MPLS network as if they were on the same LAN. VPLS tunnels can be signaled using either Label Distribution Protocol (LDP) or Border Gateway Protocol (BGP). In this question, we have two links between R1 and R2 with different bandwidths (10 Gbps and 1 Gbps). We want to use both links as much as possible for VPLS traffic. To achieve this, we need to enable per-prefix load balancing on both routers. Per-prefix load balancing is a feature that allows a router to distribute traffic across multiple equal-cost or unequal-cost paths based on the destination prefix of each packet. This improves the utilization of multiple links and provides better load sharing than per-flow load balancing, which distributes traffic based on a hash of source and destination addresses4. Per-prefix load balancing can be enabled globally or per interface using the load-balance per-packet command.
NEW QUESTION # 57
Which two statements are correct about reflecting inet-vpn unicast prefixes in BGP route reflection? (Choose two.)
Answer: A,D
NEW QUESTION # 58
Exhibit
Referring to the exhibit, what do the brackets [ ] in the AS path identify?
Answer: D
Explanation:
Explanation
The brackets [ ] in the AS path identify an AS set, which are groups of AS numbers in which the order does not matter. An AS set is used when BGP aggregates routes from different ASs into a single prefix. For example, if BGP aggregates routes 10.0.0.0/16 and 10.1.0.0/16 from AS 100 and AS 200, respectively, into a single prefix 10.0.0.0/15, then the AS path for this prefix will be [100 200]. An AS set reduces the length of the AS path and prevents routing loops.
NEW QUESTION # 59
Exhibit
CE-1 and CE-2 are part of a VPLS called Customer1 No connectivity exists between CE-1 and CE-2. In the process of troubleshooting, you notice PE-1 is not learning any routes for this VPLS from PE-2, and PE-2 is not learning any routes for this VPLS from PE-1.
Answer: B
Explanation:
Explanation
VPLS is a technology that provides Layer 2 VPN services over an MPLS network. VPLS uses BGP as its control protocol to exchange VPN membership information between PE routers. The route target is a BGP extended community attribute that identifies which VPN a route belongs to. The route target must match on PE routers that participate in the same VPLS instance, otherwise they will not accept or advertise routes for that VPLS.
NEW QUESTION # 60
......
our JN0-664 exam questions beckon exam candidates around the world with our attractive characters. Our experts made significant contribution to their excellence. So we can say bluntly that our JN0-664 simulating exam is the best. Our effort in building the content of our JN0-664 Study Materials lead to the development of learning guide and strengthen their perfection. To add up your interests and simplify some difficult points, our experts try their best to design our study material and help you understand the learning guide better.
Valid JN0-664 Test Answers: https://www.realvce.com/JN0-664_free-dumps.html
BTW, DOWNLOAD part of RealVCE JN0-664 dumps from Cloud Storage: https://drive.google.com/open?id=1SdNAaOmubp5V958CWjWeoHfwDTrFhWdv
